HAXO-8 Multi-Use Humidity & Temperature Logger

Applications

All applications where capturing both temperature and humidity data is important

Product Summary

The LogTag® Humidity & Temperature Recorder measures and stores up to 8000 sets of high resolution humidity and temperature readings over 0 to 100%RH & -40 °C to +85 °C measurement ranges.

Using the LogTag® Interface and LogTag's freely available companion software LogTag® Analyzer, the LogTag® is easily set-up for recording conditions including delayed start, sampling interval, number of readings, continuous or fixed number of readings and configuration of conditions to activate the ALERT indicator. Readings are downloaded using LogTag® Analyzer which provides facilities for charting, zooming, listing data statistics and allows exporting the data to other applications such as Excel.

Please note: An interface is required for configuration and reporting

Product Highlights

Alert indicator - indicates if readings are outside of preset limits
OK indicator indicates if still recording and if readings within configured limits
Inspection mark in log by push button
Push Button Logging start
Rapid Download! Takes only seconds to download recordings
'Pre-Start' logging - Logtag® can be configured to record even if it has not been started.
High performance at low cost

Credit card sized case - thin enough to be easily mailed "letter rate".
Real time clock records time & temperature simultaneously
Easy to use LogTag®Analyzer software that runs on any PC configures LogTag® for recording then downloads resulting data for analysis. Data can also be exported to formats compatible with other applications such as Excel
Fine resolution of measurement - 0.1% RH & 0.1 °C
Re-calibration to achieve higher accuracy possible
Replaceable sensor air filter

Technical Specifications

Part Order Code	HAXO-8
Humidity Measurement range	0 ~ 100 % RH but with limitations as detailed in Humidity Measurement Operating and Storage conditions below
Temperature Measurement range	-40 ~ +85 °C
Humidity Resolution	better than 0.1 % RH
Temperature Resolution	better than 0.1 °C
Capacity	8000 pairs of humidity & temperature readings (32 Kbytes memory)
Sampling frequency	adjustable, 30 sec to several hours
Download Time	Typically with full memory in less than 10 seconds depending on computer or readout device used.
Environmental	IP61 (when hung or mounted vertically)
Power source	3V LiMnO2 Battery
Battery life	2~3 years typical use
Size	86 mm (H) x 54,5 mm (B) x 8,6 mm (T)
Weight	35 grams
Case Material	Polycarbonate
*Optimal Storage Condition	For optimal Humidity logger storage, store units in original packaging in an air conditioned area. Storage temperature shall be in the range of 10°C to 50°C and humidity at 20 %RH to 60 %RH. Ensure good ventilation (fresh air supply) in storage area to avoid high concentrations of volatile chemicals. Do not store units in the same room as solvents or any other strong smelling products.
LogTag® Recorders reserves the right to change this product's specifications without notice.

Humidity Measurement Operating and Storage Conditions

This chart shows the normal recommended operating range of the humidity sensor.
Conditions outside the recommended range may temporarily offset the RH signal up to ±3 % RH. After return to normal conditions it will slowly return towards calibration state by itself. See section "Re-Conditioning Procedure" in the data sheet to accelerate this process. Prolonged exposure to extreme conditions may accelerate ageing.