High Temperature Rigid Dielectric Cell LD-3T

• High Temperature Dielectric Cell is designed for testing rigid flat materials at elevated temperatures in an oven.
• Temperature: 400 Deg. F / 200 Deg C
• Frequency Range: 50Hz to 1MHz

Description

The LD-3T High Temperature Dielectric Cell is designed for testing rigid flat materials at elevated temperatures in an oven. The dielectric cell can be used up to 200 Degrees C.

Material up to 8cm or 3 1/8 inches with a maximum thickness of 1.1 cm or 7/16 inches can be used in the dielectric cell. The dielectric cell is made up of two electrodes. One electrode is fixed with a grounded guard ring and the other is movable via a micrometer. The micrometer allows precise measurement of electrode spacing. The grounded guard ring reduces fringe effects to improve measurements.

The dielectric cell has a usable frequency range from 50 Hz to 1MHz.

The three terminal electrical connections are made via GR-874 Connection on the fixed electrode side, optional BNC to GR-874 adapter is available, and banana connection on the movable electrode side.

Designed for use: Elevated temperatures to 200 Degrees C. of solids, semi-solids; plastics, epoxy; thin film; laminates; PC boards

Required Accessories:

2 x LD-04T High Temperature 1 Meter BNC to BNC cable set

2 x LD-02 BNC T Adapters

1 x LD-08 GR874 to BNC Adapter

1 x LD-05T BNC to Banana Adapter