TIC20 Tamper-proof WHO temperature indicator

TIC20 Tamper-proof WHO temperature indicator

 

Applications

The LogTag TIC20 is a disposable electronic temperature indicator for use in monitoring temperature & time statistics in pharmaceutical transport applications of up to 20 days duration.

Product Summary

Current temperature, elapsed time, load status, monitoring status and battery condition can all be seen at a glance at any time during the trip. On arrival at the destination, monitoring can be stopped and the user can then review time and temperature statistics for each day of the trip, up to 20 days maximum.

The LogTag TIC20 is factory pre-configured for one of a range of monitoring profiles. Special profiles are available on request, subject to conditions.

Statistical data can be downloaded from the TIC20 using an interface cradle and freely available LogTag Analyzer operating software if required.

The TIC20 offers an accurate and cost effective solution for monitoring the pharmaceutical cold chain in "last mile" distribution and other applications where full data logging capability is not required.

Features:

  • Factory pre-configured to monitor a range of standard vaccines
  • Standard 60 minute start delay
  • Clear indication of temperature history/alarm status at all times
  • Up to 20 days temperature records can be viewed on the display
  • Push button Start and Stop. Push Review button to display daily statistics in sequence
  • Data can be downloaded via an interface cradle and LogTag Analyzer if required
  • Robust and Accurate. Data collected is secure and cannot be manipulated
  • Fits easily into packages and can be mailed via letter rate

Modes of Operation:

Ready-Mode Push any button. "Ready" shows the indicator is ready to be started.

Start Mode Press and hold the Start button. "Monitoring" will flash. Release Start button when flashing stops. The Indicator is now in the 60 minute start delay.

Monitoring Mode "Monitoring" appears on the display. The indicator is now taking a temperature reading every 6 minutes. Elapsed time in hours and days appears on the display. If an Alarm occurs, the day segment is illuminated and the OK symbol is replaced by an X.

Review Mode Press the Review button to view statistics for each day.

Stopped Mode Press and Hold the Stop button. "Stopped" will flash. Release Stop button when flashing stops. The Indicator is now Stopped.

Factory Configurations

  • Type 1 Alarm version DTP, DT, TT, Td, HepB, IPV, liquid Hib, MenAfrivac, HPV and PCV vaccines.
  • Type 2 Alarm version OPV, freeze-dried BCG, measles, MR, MMR, lyophylized Hib, yellow fever, meningitis, Rabies and Rotavirus vaccines.
  • Type Prevenar Alarm version Prevenar 7&13
  • Type RotaTeq Alarm version RotaTeq®

 

Product Specifications

Operating Temperature Range -30 °C to +60 °C
Storage Temperature Range: -30 °C to +65 °C
Ambient humidity range during transport and use 0 to 95 % RH
Resolution
Less than 0.1°C for -30°C to +60°C.
Less than 0.2°C for -30°C to +40°C.
1.0°C from -40°C to +60°C
Accuracy

  • Better than ±0.5 °C for -10 °C to +40 °C
  • Better than ±1.0 °C for -30 °C to -10 °C
  • Better than ±1.0 °C for +40 °C to +60 °C

Capacity

  • Minimum & Maximum temperature for each of the 20 days
  • 1st activation of each Alarm for each day including Trigger time and duration of each excursion

Memory type Non volatile
Sampling Interval Factory set to 6 minute interval (i.e 0.1hour)
Logging modes 20 day statistics, temperature/time excursions and Alarm trigger time and duration for each day

Logging Start delay Factory set to 60 minute interval
Sensor Precision thermistor
Sensor Reaction time T90 less than 7 minutes by method detailed in EN12830:1999
Vibration Withstands vibration specification as detailed in EN12830:1999
Shock

  • Withstands shock specification as detailed in EN12830:1999/li>
  • Withstands 5 drops from 1m to smooth concrete floor without loss of function or calibration

Environmental IEC 60529: IP64
Power source 3 V Lithium battery - non replaceable
Battery life:

  • Minimum storage life of 5 years before 'start'
  • Monitoring period: 20 days
  • Minimum accessibility (display) period of 6 months after 'stopped'

Size 73 mm (H) x 33.0 mm (B) x 8.6 mm (T) (Volume <34 cm3)
Weight  30 g
Case Material Polycarbonat
Calibration Traceable to an ISO/IEC 17025 accredited testing laboratory, to NIST, or to another internationally recognized standards agency
EMV compliance

  • EC EMC directives
    (EN 61000-6-1:2005 & EN 61000-6- 3:2006)
  • Includes electrostatic discharge as prescribed in EN 61000-4-2
  • Complies with FCC Part 15 Subparts A and B

Alarms function & display

  • Alarm functions as prescribed in the WHO PQS performance specification E06/TR07.2
  • Alarms are displayed on a custom LCD
  • Display activates when any button is pressed
  • Display is static allowing photocopying

Inquiry Form

Our partners in other countries

Amtest-TM Kft. (HU) - Attila Polgar Amtest PL (PL) - Dariusz Koziello Amtest-TM ELTH srl (RO) - Bogdan Valcea ADELANTEST Ltd (RUS) - Igor Kozlov GIGA Electronic Ltd. - Danail Georgiev OÜ Est-Doma (EST) Promix Ltd. (UA) - Oleksandr Labuzov Vildoma (LT, LV)

We cooperate with partners and resellers in other European countries

View partners